At AudioVisual FX we hire both the LD Systems IOCA12 & IOCA15 powered speaker systems. Located only a few minutes from Melbourne, you can make an appointment or come into our showroom and audition them before your hire .. inexpensive and brilliant ! The LD Systems ICOA 12 A is a full-range PA loudspeaker. Delivering outstanding sound, even at low frequencies, the ICOA 12 A offers unparalleled features for its class. Featuring a coaxial design, rotating, BEM-Optimised CD Horn, and extensive and precisely calibrated Dynx DSP presets. As a result, the ICOA active 12″ loudspeaker is exceptionally flexible. With outstanding bass reproduction from the horn-loaded woofer; the LD ICOA 12 A is the ideal choice for musicians, bands, entertainers and schools. While also allowing DJs to play sets without the need for an additional subwoofer. Sit your speaker vertically, and it impresses as a satellite. While horizontally it’s perfect in suspended systems or as a floor monitor. Packing an efficient Class-D power amplifier, the ICOA 12 A delivers 126 dB max SPL . Product type PA loudspeaker Type Actives Low/mid driver dimensions 12 “ Woofer size 304.8 mm Woofer magnet Ferrite Woofer brand Custom-made Horn BEM optimized CD Horn HF driver dimensions 1 “ HF Driver Size 25.4 mm HF driver magnet Ferrite HF driver brand Custom-made HF driver voice coil 1 “ HF Driver Voice Coil 25.4 mm Amplifier Class D Dispersion (H x V) 90 ° x 50 ° RMS 300 W Peak power 1200 W Frequency response 50 – 20000 Hz Crossover frequency kHz 2 kHz Max. SPL (peak) 126 dB Protection circuits Multiband limiter , over voltage , over-current , thermal overload Controls 2 x gain , On / off switch , Rotary/push encoder Indicators LC display Mic/ line inputs 2 Mic-/ Line Input Connectors 6.3 mm jack Combination sockets (symmetrical) , XLR Line inputs 1 Line input connectors 3.5 mm TRS Line outputs 1 Line output connectors XLR Operating voltage SMPS Power consumption 150 W Ambient temperature ( in operation ) 0 – 40 °C Operating voltage 100 V – 240 V AC / 50 – 60 Hz Relative Humidity < 80 %, not condensing Fuse T4AL 250 V Cabinet material polypropylene Cabinet construction vented tripod flange 32 °F , 36mm flange , 5° Monitor angle 55 ° Width 375 mm Height 635 mm Depth 396 mm Weight 19,95 kg

At AudioVisual FX we hire both the LD Systems IOCA12 & IOCA15 powered speaker systems. Located only a few minutes from Melbourne, you can make an appointment or come into our showroom and audition them before your hire .. inexpensive and brilliant ! The LD Systems ICOA 15 A is a genuine, all-round PA speaker. Delivering outstanding sound, even at low frequencies, the ICOA 15 A offers unparalleled features for its class. Featuring a coaxial design, rotating, BEM-Optimised CD Horn, and extensive and precisely calibrated Dynx DSP presets. As a result, the ICOA active 15″ loudspeaker is exceptionally flexible. With outstanding bass reproduction from the horn-loaded woofer; the LD ICOA 15 Ais the ideal choice for musicians, bands, entertainers and schools. While also allowing DJs to play sets without the need for an additional subwoofer. Sit your speaker vertically, and it impresses as a satellite. While horizontally it’s perfect in suspended systems or as a floor monitor. Packing an efficient Class-D power amplifier, the ICOA 15 A delivers 128 dB max SPL. A genuine all-rounder for full-range, satellite and monitor applications 128 dB max. SPL and 300 W RMS performance Vertical and horizontal use thanks to coaxial design with rotating, BEM-optimised CD horn Horn-loaded woofer DynX DSP with 4 presets, 3-band EQ and delay function 2 line/mic input channels with individual gain controllers plus mono mix output; Bluetooth® streaming with the BT model 36 mm dual tilt stand attachment with 0° and 5° tilt angle, 55° monitor angle with sturdy stand Shock-resistant front grille for optimal protection of the speaker 4 aluminium grips with ergonomic, rubber surface Product type PA loudspeaker Type Actives Low/mid driver dimensions 15 “ Woofer size 381 mm Woofer magnet Ferrite Woofer brand Custom-made Horn BEM optimized CD Horn HF driver dimensions 1 “ HF Driver Size 25.4 mm HF driver magnet Ferrite HF driver brand Custom-made HF driver voice coil 1 “ HF Driver Voice Coil 25.4 mm Amplifier Class D Dispersion (H x V) 90 ° x 50 ° RMS 300 W Peak power 1200 W Frequency response 48 – 20000 Hz Crossover frequency kHz 2 kHz Max. SPL (peak) 128 dB Protection circuits Multiband limiter , over voltage , over-current , thermal overload Controls 2 x gain , On / off switch , Rotary/push encoder Indicators LC display Mic/ line inputs 2 Mic-/ Line Input Connectors 6.3 mm jack Combination sockets (symmetrical) , XLR Line inputs 1 Line input connectors 3.5 mm TRS Line outputs 1 Line output connectors XLR Operating voltage SMPS Power consumption 150 W Ambient temperature ( in operation ) 0 – 40 °C Operating voltage 100 V – 240 V AC / 50 – 60 Hz Relative Humidity < 80 %, not condensing Fuse T4AL 250 V Cabinet material polypropylene Cabinet construction vented tripod flange 32 °F , 36mm flange , 5° Monitor angle 55 ° Width 416 mm Height 695 mm Depth 415 mm Weight 24.3 kg

Active 2-Way 12" PA Speaker System . .

The Milan M12 1,100-Watt 2-Way 12" Powered Loudspeaker from Turbosound is a Class-D powered speaker that can be used for a variety of PA applications in both portable and installed scenarios. It features 2 independent input channels with mic and line inputs as well as a 2-band EQ and intelligent limiting. A mix output connector allows you to connect to other Milan series loudspeakers. Its processing is powered by the integrated Klark Teknik DSP and has an electronic crossover. A low-cut filter at 100Hz allows you to use the M12 as a wedge monitor, but it can also be pole mounted or flown for a variety of placement options. Its trapezoidal enclosure is constructed from high density polypropylene and is designed to reduce resonances internally. It features a recessed handle for carrying. 2 way full range powered loudspeaker for portable PA and installation applications 1,100 Watt power featuring Klark Teknik Class-D technology Klark Teknik Digital Signal Processing for total system control High excursion 12-inch low frequency driver with low mass voice coil for transient response 1-inch high temperature dome compression driver with extended high frequency reproduction Converging elliptical waveguide provides wide dispersion and excellent pattern control Speech/music switch featuring optimized equalization for voice or music applications Switchable 100 Hz high pass filter for subwoofer integration Lightweight composite enclosure with black finish Rugged powder coated perforated steel mesh grille Dual angle pole mount for accurate audience coverage Multiple internal rigging points for installation applications

NuQ152-AN 2500W 2-Way 15" Full Range Powered Loudspeakers from Turbosound are ideally suited for a wide range of portable and fixed-installation speech and music sound-reinforcement applications. Designed to work individually without a controller, the NuQ152-AN Loudspeaker provides optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge-monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications. The NuQ152-AN Loudspeaker features a 15" low-frequency driver with a low-mass voice coil for improved transient response and an aluminum dome with 1" neodymium high-frequency compression driver, which is mounted on a rotatable 70 x 70° (horizontal x vertical) dispersion-converging elliptical waveguide. Output power for the NuQ152-AN Loudspeaker is provided by means of an efficient and lightweight KLARK TEKNIK 2500W Class-D power amplifier. An easy-to-use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full-range response at low volume levels and transparent limiting for clarity at high output levels as well as for long-term reliability. On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to position compensation, user EQ control, subwoofer integration, and signal-routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ152-AN Loudspeaker via Windows computer, as well as DSP firmware updates. ULTRANET connectivity is provided by two locking etherCON connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single Cat5 cable between compatible digital devices including mixers, input/output stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation. Finished in a highly durable semi-matte black paint, the trapezoidal cabinet is constructed from 15mm birch plywood, and includes a rugged powder-coated perforated-steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ152-AN Loudspeaker also features a 35mm socket for standard pole mounting plus integrated handles for convenient transport. Mains power input is provided via a Neutrik powerCON connector. 2-way full-range powered loudspeaker for portable PA applications 2500W power featuring KLARK TEKNIK Class-D technology for total system control ULTRANET digital audio networking connects to mixers and other sources Carbon fiber-loaded 15" low-frequency driver with inside/outside coil Aluminum dome with 1" neodymium motor compression driver Low-distortion waveguide provides 70 x 70° (H x V) dispersion Fully featured user interface with LCD display for ease of navigation Windows computer remote control software downloadable 15mm birch-plywood enclosure with hard-wearing semi-matte black paint finish Rugged powder-coated perforated-steel mesh grille Integral 35mm pole mount and handles Multiple internal rigging points allow bracket mount and suspension in any orientation Mains input on Neutrik powerCON connector

Active 2-Way 15" PA Speaker System with Integrated Mixer . . High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels "Wireless-ready" for high-quality Behringer digital wireless system (not included) 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction Ultra-wide dispersion, large-format exponential horn Additional Line output allows linking of additional speaker systems Versatile trapezoidal enclosure design allows different positioning: - Stand mounting with 35-mm pole socket - Tilts on its side for use as a floor monitor Ergonomically shaped handles for easy carrying and setup

The QTX QX15PA Portable PA System is a compact loudspeaker with an integrated amplifier and a media player. The QTX QX15PA offers 100-watts of continuous output and can be operated via either a mains power supply or rechargeable battery. The 15'' low-frequency woofer produces deep, room-filling bass responses while the 1'' titanium compression driver delivers accurate and crystal-clear mids/highs. The built-in media player allows you to play audio from USB storage devices and SD cards, or wirelessly stream music from Bluetooth-enabled smartphones/tablets. The QX15PA loudspeaker comes complete with an ergonomic carry handle, a retractable trolley handle and rear wheels which ensure convenient transport the unit. High-Frequency Driver: 1'' Titanium Compression Tweeter Low-Frequency Driver: 15'' Woofer Wireless Microphones Band: VHF Wireless Microphone Frequency: 174.1MHz + 175MHz Input Connectors: 2 x 1/4'' Microphone Jacks 3.5mm Aux Jack RCA Power Output: 100W (50W HF + 50W LF) Dispersion: 90° x 60° (H x V) Bluetooth Connectivity: V2.1 Controls: Volume Bass Treble Echo Delay Mic Vol VHF Vol Contour VCM Bluetooth Internal Battery: 12V DC Power Supply: 220V - 240V AC, 50Hz - 60Hz Dimensions: 675mm x 420mm x 395mm Weight: 18.1kg

The QTX Sound QR12PA is a well thought out portable PA system perfect for busking, DJs and a variety of other applications. With a built-in MP3 player, 8 hours of battery life, 2 wireless microphones and auxiliary/line inputs, the QR12PA provides everything you need to perform on the go. The robust ABS enclosure with unique portable design allows simple transportation. Inputs: 2 x Microphone, 1 x Aux Amplifier Output (RMS): 50 + 50W Power Handling (RMS): 200W Main Driver: 12" Frequency Response: 48 Hz - 20 kHz SPL: 100 dB Microphones: 2 x VHF Handheld Wireless Microphone Frequencies: 174.1 MHz and 175.0 MHz Microphone Effects: Echo Media Player: Internal USB/SD Battery Life: Up to 8 Hours Power Consumption: 100W Transportation: Built-In Trolley Housing: Rugged ABS Controls: Mic Volume, Echo, Bass, Treble, Volume, VHF Mic Volumes Height: 570 mm Width: 310 mm Depth: 350 mm Weight: 14 Kg

The Turbosound iNSPIRE iP2000 is a self-contained full-range powered speaker system well-suited for small-to-medium-sized performance venues, houses of worship, boardroom presentations, nightclubs, and more. The 1000-watt powered column loudspeaker features a 12" subwoofer, 16 neodymium mid-hi drivers, a horn-loaded super tweeter, KLARK TEKNIK Spatial Sound Technology (SST), a digital mixer, Bluetooth audio streaming, and remote control via iPhone/iPad.

NuQ82-AN 600W 2-Way 8" Full-Range Powered Loudspeaker from Turbosound is ideally suited for a wide range of portable and fixed-installation speech-and-music sound-reinforcement applications. Designed to work individually without a controller, the NuQ82-AN Loudspeaker provides optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications. The NuQ82-AN Loudspeaker features an 8" low-frequency driver with a low-mass voice coil for improved transient response and an aluminum dome with 1" neodymium high-frequency compression driver, which is mounted on a rotatable 100 x 60° (horizontal x vertical) dispersion-converging elliptical waveguide. Output power for the NuQ82-AN Loudspeaker is provided by means of an efficient and lightweight KLARK TEKNIK 600W Class-D power amplifier. An easy-to-use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full-range response at low volume levels and transparent limiting for clarity at high-output levels as well as for long-term reliability. On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to position compensation, user EQ control, subwoofer integration, and signal-routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ82-AN Loudspeaker via Windows computer, as well as DSP firmware updates. ULTRANET connectivity is provided by two locking etherCON connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single Cat5 cable between compatible digital devices including mixers, input/output stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation. Finished in a highly durable semi-matte black paint, the trapezoidal cabinet is constructed from 12mm birch plywood, and includes a rugged powder-coated perforated-steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ82-AN Loudspeaker also features a 35mm socket for standard pole mounting plus integrated handles for convenient transport. Mains-power input is provided via a Neutrik powerCON connector. 2-way full-range powered loudspeaker for portable PA applications 600W power featuring KLARK TEKNIK Class-D technology for total system control ULTRANET digital-audio networking connects to mixers and other sources 8" low-frequency driver with low-mass voice coil for improved transient response Aluminum dome with 1" neodymium motor compression driver Rotatable converging-elliptical waveguide provides 100 x 60° (H x V) dispersion Fully featured user interface with LCD display for ease of navigation Windows computer remote-control software downloadable 12mm birch-plywood enclosure with hard-wearing semi-matte black paint finish Rugged powder-coated perforated-steel mesh grille Integral 35mm pole mount and handles Multiple internal rigging points allow bracket mount and suspension in any orientation Mains input on Neutrik powerCON connector Turbosound NUQ82 Specs System Frequency Response 65 Hz to 18 kHz ±3 dB 55 Hz to 20 kHz -10 dB Nominal Dispersion 100 x 60° (H x V) @ -6 dB points, rotatable Maximum SPL 122 dB peak Crossover Type Active Transducer 1 x 8" (211.5 mm) LF driver 1 x 1" (25.4 mm) HF compression driver Limiter Independent HF, LF, peak, and rms Amplifier Maximum Output Power 600 W Type Class-D Protection Short circuit, thermal Connectors Input/Output 1 x combo jack / XLR 1 x XLR Sensitivity +4 dBu or +14 dBu software switchable Input Impedance 40 kOhms balanced Maximum Input Level +22 dBu Connectivity (RJ-45) 2 x RJ45 Mains Supply Neutrik powerCON 20 A DSP DSP Rotary push-encoder and level control Buttons for Process, Setup, Exit, Enter Display LCD 128 x 32, blue, backlit Delay 0 to 300 ms Equalization High- and low-shelving EQ 2 x parametric EQ Presets: Positioning, Sound mode, FBQ Limiter Zero-attack input limiter Presets 20 total presets, 19 user-definable Crossover High-Pass L-R 24 dB/oct Protection Lock-out function for all settings Connectivity Processing 24-bit, 44.1/48 kHz sample rate (digital) Converter Type 24-bit, delta-sigma System Signal 16 channels Latency < 0.9 ms Frequency response 20 Hz to 20 kHz (+0 / -3 dB) Dynamic range typical 92 dB Cabling Shielded Cat5 Maximum 246' (75 m) (not included) Power Supply Power Consumption 80 W @ 1⁄8 maximum power Voltage 120 V, 60 Hz (T 6.3 A H 250 V) Construction 0.5" (12 mm) birch plywood Grille Powder-coated perforated steel Dimensions (H x W x D) 18.3 x 10.8 x 9.90" (46.4 x 27.4 x 25.2 cm) Weight 24.9 lb (11.3 kg)

The 3,000 Watt NuQ115B-AN is a powered 15" subwoofer system that is ideally suited for a wide range of music and live sound reinforcement applications. Designed to work individually without a controller, the NuQ115B-AN provides optimal FOH performance, as well as exceptional drum and side fill monitoring applications. A bass reflex port design enclosure, the NuQ115B-AN features a high power, double suspension 15" low frequency driver that utilizes a specialized inside/outside wound voice coil for higher magnetic density, better heat dissipation, high power handling capacity and improved efficiency. The NuQ115B-AN subwoofer provides fast and accurate transient response for virtually distortion-free operation. Turbosound NuQ115B-AN Specifications Frequency Response 45Hz - 150Hz +/-3dB 38Hz - 200Hz -10dB Nominal dispersion Half Space Maximum SPL 135dB peak Crossover type Active Transducers 1x 15" (387 mm) LF driver Limiter Peak and rms Amplifier: Maximum output power 3000W Amplifier: Type Class-D Amplifier: Protection Short circuit, thermal Controls: DSP Rotary push-encoder and level control Buttons for process, setup, exit, enter Connectors: Input/link 1x Combo Jack/XLR, 1x XLR Connectors: Sensitivity +4 dBu or +14 dBu software switchable Connectors: Input impedance 40kOhms balanced Connectors: Maximum input level +22 dBu Connectors: Ultranet input/link 2x RJ45 Connectors: Mains Supply Neutrik powerCON 20A User DSP Functions: Factory EQ presets Positioning, Sound mode User DSP Functions: Display LCD 128 x 32, blue, backlit User DSP Functions: Delay 0 - 300 ms User DSP Functions: Equalisation High and low shelving EQ 2x parametric EQ User DSP Functions: Limiter Zero attack input limiter User DSP Functions: Presets 20 total presets, 19 user-definable User DSP Functions: Crossover Low Pass L-R 24dB/oct User DSP Functions: Protection Lock-out function for all settings Ultranet Network: Digital processing A/D conversion: 24-bit, 44.1/48 kHz sample rate Converter type: 24-bit, delta-sigma Ultranet Digital Network: System Signal: 16 channels Latency: < 0.9 ms Frequency response: 20Hz to 20kHz (+0 / -3dB) Dynamic range: Typical 92dB Ultranet Digital Network: Cabling Cables: Shielded CAT5 Cable length: Max. 246' / 75m recommended Power Consumption 180W at 1/8 max power Voltage (fuses) 120 V, 60 Hz (T 15 A H 250 V) Construction 18 mm (5/8") birch plywood Finish Semi matt black paint Grille Powder coated perforated steel Flying Hardware M10 x 16 Points Dimensions (H x W x D) 519 x 579 x 620mm / 20.43 x 22.8 x 24.41" Weight 37kg / 81.57lbs

The MSP3 Powered Monitor Speaker is a 2-way powered monitor speaker system that delivers quality audio and excellent cost performance. Designed for use in personal music production systems, each unit features a built-in 20-watt amplifier that drives both the 10cm (4") cone and 2.2cm (7/8") tweeter. To facilitate connection with a variety of audio sources, each monitor is equipped with a balanced XLR input, for direct compatibility with professional equipment, a balanced phone jack input and an unbalanced RCA jack input. The MSP3 also features separate volume controls for the LINE 1 (RCA jack) input and LINE 2 (XLR/phone) input plus HIGH and LOW tone controls for sound tailoring. Compact, two-way powered monitor system Built-in 20-watt amplifier Two Line inputs Balanced XLR, balanced phone jack and unbalanced RCA jack inputs for versatile connectivity High and Low tone controls for sound tailoring Separate Line 1 and Line 2 level controls Waveguide technology delivers broad, uniform dispersion of high frequencies for optimum Magnetic shielding

The Turbosound iNSPIRE iP500 is a self-contained full-range powered speaker system well suited for small to medium-sized performance venues, houses of worship, boardroom presentations, nightclubs, and more. The 600-watt powered column loudspeaker features a single 8" subwoofer, six neodymium high-frequency drivers, KLARK TEKNIK Spatial Sound Technology (SST), a digital mixer, Bluetooth audio streaming, and remote control via iPhone/iPad. With a 100° dispersion, the iP500 V2 provides such wide coverage; it eliminates the need for monitor wedges for performers and creates a more even, sonically balanced soundscape that covers the entire room. Additionally, the SST creates a well-defined virtual 3-D environment, enveloping the listener in a rich and more realistic experience. The integrated DSP ensures the greatest signal integrity possible by analyzing the incoming signal and intelligently applying specific filters to improve the sound quality. The built-in digital mixer accepts balanced and unbalanced connections for dynamic microphones and line-level instruments. The on-board interface is simple by design with a rotary push encoder and buttons for Process, Setup, Exit, and Enter. The back-lit LCD displays parameters for Delay, Limiter, High/Low shelving and parametric EQs, and Presets. All controls can be controlled locally, or via the free downloadable iOS app. The iP500 ships with a standard IEC power cord and a durable shoulder bag for carrying the column sections. Modular column loudspeaker for portable PA applications and high-quality music playback Klark Teknik's revolutionary SST (Spatial Sound Technology) for creating 3D acoustic environments Wide sound dispersion provides consistent sound to the audience and performers 600W power, multichannel Klark Teknik Class-D technology 3-channel digital mixer with gain setting recall Studio-grade stereo reverb adds finishing touch to your sound Comprehensive remote control via Apple iPhone/iPad High-quality Bluetooth stereo audio streaming DSP presets for application type and speaker positioning Intuitive single rotary control user interface with LCD display for ease of navigation 8" high-excursion low-frequency driver for low distortion sub-bass response 6 x 2" neodymium drivers with edge wound aluminum voice coils for extended high-frequency reproduction Multiple height configurations for floor or elevated use Precision-lock system eliminates speaker cables and stands High impact and lightweight enclosure Integrated protective perforated steel mesh grilles Integral ergonomic carrying handle for ease of portability Durable shoulder bag included for carrying column sections

Need to make it LOUDER ! Hire a megaphone from us in Melbourne..

The QTX QX15PA Portable PA System is a compact loudspeaker with an integrated amplifier and a media player. The QTX QX15PA offers 100-watts of continuous output and can be operated via either a mains power supply or rechargeable battery. The 15'' low-frequency woofer produces deep, room-filling bass responses while the 1'' titanium compression driver delivers accurate and crystal-clear mids/highs. The built-in media player allows you to play audio from USB storage devices and SD cards, or wirelessly stream music from Bluetooth-enabled smartphones/tablets. The QX15PA loudspeaker comes complete with an ergonomic carry handle, a retractable trolley handle and rear wheels which ensure convenient transport the unit. High-Frequency Driver: 1'' Titanium Compression Tweeter Low-Frequency Driver: 15'' Woofer Wireless Microphones Band: VHF Wireless Microphone Frequency: 174.1MHz + 175MHz Input Connectors: 2 x 1/4'' Microphone Jacks 3.5mm Aux Jack RCA Power Output: 100W (50W HF + 50W LF) Dispersion: 90° x 60° (H x V) Bluetooth Connectivity: V2.1 Controls: Volume Bass Treble Echo Delay Mic Vol VHF Vol Contour VCM Bluetooth Internal Battery: 12V DC Power Supply: 220V - 240V AC, 50Hz - 60Hz Dimensions: 675mm x 420mm x 395mm Weight: 18.1kg

The QTX Sound QR12PA is a well thought out portable PA system perfect for busking, DJs and a variety of other applications. With a built-in MP3 player, 8 hours of battery life, 2 wireless microphones and auxiliary/line inputs, the QR12PA provides everything you need to perform on the go. The robust ABS enclosure with unique portable design allows simple transportation. Inputs: 2 x Microphone, 1 x Aux Amplifier Output (RMS): 50 + 50W Power Handling (RMS): 200W Main Driver: 12" Frequency Response: 48 Hz - 20 kHz SPL: 100 dB Microphones: 2 x VHF Handheld Wireless Microphone Frequencies: 174.1 MHz and 175.0 MHz Microphone Effects: Echo Media Player: Internal USB/SD Battery Life: Up to 8 Hours Power Consumption: 100W Transportation: Built-In Trolley Housing: Rugged ABS Controls: Mic Volume, Echo, Bass, Treble, Volume, VHF Mic Volumes Height: 570 mm Width: 310 mm Depth: 350 mm Weight: 14 Kg

The XDJ-R1 is the all-in-one dream: the union of CD/USB decks, DJ software control, a top-flight mixer, powerful performance features and intuitive remote control via iPad, iPhone and iPod touch using our remotebox app. Analyse your tracks in the included rekordbox™ software and load via USB to access a host of exciting features including Beat Sync and Quantized Beat FX. Supported music file formats MP3 AAC WAV AIFF USB record Yes File systems FAT16 FAT32 MIDI Control Yes Plug and Play Yes Auto Standby Yes Included DJ Software VirtualDJ LE Software System Requirements Windows: Windows 8 Windows 7 Home Premium/Professional/Ultimate Windows Vista Home Basic/Home Premium/ Ultimate/Business (SP2 and above) Windows XP Home Edition/Professional (SP3 and above) ***not compatible with Windows XP Professional x64 edition*** Mac OSX 10.5.8 or above iPhone/iPad/iPod touch iOS 5 / 4.3 or later For more information visit rekordbox.com Download the remotebox app on the App Store

Industry standard Pioneer CDJ2000 NXS2 media player available for hire in our showroom in Melbourne. For the best possible club sound, the CDJ2000NXS2 features a 96 kHz/24-bit sound card and improved the digital signal processing (DSP) and Digital Out. Analogue noise is reduced to a minimum by a high-performance 32-bit D/A converter and separate analogue power supply. Crisp high-resolution audio is supported for FLAC, Apple Lossless Audio (ALAC), as well as MP3, WAV, AAC, and AIFF. The 7-inch, full-colour touch screen on the CDJ 2000 gives you instinctive control of your favourite features. It displays all the info you need, including Wave Zoom, Needle Countdown, Phase Meter, and more. Keyword Search and Track Filter mode help you browse and select your tracks faster for effortless performance. Large 7-Inch 7-inch, full-colour LCD touchscreen Multi-coloured wave form display 8 Hot-cue / Hot-loop points Improved browser for faster track searches Intuitive control buttons for faster system control, includes qwerty keyboard display 4-Deck Sync compatible Plays CD, DVD, USB, SD Card, and via WiFi (Rekordbox from PC or MAC) New MIDI control interface for DDJ-SP1 High quality sound card Compatible with: iPhone®/iPad®/iPod touch®, Android® phone/Android Tablet etc, USB storage devices (flash, memory/HDD, etc.) Computers (Mac/Windows PC), Audio CD, CD-R/RW Supported Media formats: ALAC / AAC / AIFF / FLAC / MP3 / WAV (iOS version of rekordbox: MP3 and AAC only) Soundcard: 24-bit/96kHz sound card Frequency Response: 4 Hz ~ 20 kHz Signal to Noise Ratio: 115 dB Distortion: < 0.002 % (USB) Audio Output Level: 2.0 V rms (1kHz, 0 dB) USB Connections: – 1x SUB 2.0 type A (for MIDI control connection) – 1x USB 2.0 type B (for PC connection) Power Consumption: 41 W Power Requirements: 220-240 V, 50/60 Hz Dimensions (W x H xD): 320 x 113.3 x 414.4 mm Net Weight: 5.71 kg

Need to play more than 1 x CD .haven't had the chance to transfer all your Cd's to USB... then this is the ideal hire. Will hold and play 301 CD's ! SINGLE LOADER CD TEXT COMPATIBLE "CUSTOM MODE" FUNCTIONS10 BEST SELECTION MEMORY20 Track PREVIOUS DISC SCAN20 MEMORY HOLD LAST DISC MEMORY PROGRAM TOTAL TIME DISPLAY FULL FUNCTION REMOTE PROGRAMMED PLAY (TRACKS/DISCS)

Need to hire a CD Player with pitch .. Plays CDA MP3 (MPEG-1 32Kbps - 320 Kbps, MPEG-2 16 Kbps - 160 Kbps) MIDI Control Yes Anti Vibration Width 217.9 mm Height 107.5 mm Depth 296.3 mm Frequency Range 4 - 20000 Hz Signal-to-Noise Ratio > 115 dB (JEITA) Distortion < 0.006 % (JEITA)

Technics 1200 Turntable c/w Catridge & Styli The industry standard turntable. Drive Method Direct-Drive Motor Brushless DC motor Turntable Platter Aluminum diecast Diameter: 13 5/64" (33.2cm) Mass: 3.74 lbs (1.7 kg) Turntable Speeds 33-1/3 rpm, 45 rpm Variable Range Pitch ±8% Starting Torque 1.3 lb-in (1.5 kg-cm) Build-Up Characteristics 0.7s from standstill to 33-1/3 rpm Braking System Electronic brake Wow and Flutter 0.01% WRMS 0.025% WRMS (JIS C5521) ±0.035% peak (IEC 98A Weighted) Rumble -56dB (IEC 98A Unweighted) -78dB (IEC Weighted) Tonearm Section . Type Universal Effective Length 9-1/16" (230mm) Arm Height Adjustment Range 0-6mm Overhang 19/32" (15mm) Effective Mass 12g (without cartridge) Offset Angle 22° Friction Less than 7mg (lateral, vertical) Tracking Error Angle Within 2° 32' (at the outer groove of 12" record) Within 0° 32' (at the inner groove of 12" record) Stylus Pressure Adjustment Range 0-4g Applicable Cartridge Weight Range 3.5g - 13g 11g - 20.5g (including headshell) Applicable Cartridge Weight Range (with auxiliary weight) 9.5g - 13g 17g - 20.5g (including headshell) Applicable Cartridge Weight Range (with shell weight) 3.5g - 6.5g 11g - 14g (including head shell) Headshell Weight 7.5g Power Supply AC120V, 60Hz Power Consumption 14W

The original industry standard Pioneer CDJ1000 CD player available for hire in our showroom in Melbourne. Just like vinyl you can stop the digital sound with your fingers and cue up in exactly the same way. Even bending the sound or scratching with no sound latency is possible. The first CD player to allow digital to reproduce the sounds,feel and creativity of analogue. The first ever digital deck to feature such integrally analogue features in a purely digital environment. Width 320 mm Height 105 mm Depth 370 mm Weight 4.2 kg Legato Link Conversion Yes Frequency Range 4 - 20000 Hz Signal-to-Noise Ratio > 115 dB (EIAJ) Distortion

Industry standard Pioneer CDJ2000 NXS cd player available for hire in our showroom in Melbourne. The highly evolved CDJ-2000NXS includes advanced features, including 4-deck Beat Sync, Slip Mode and Hot Cue Auto Load. Plays AAC AIFF MP3 (MPEG-1 32Kbps - 320 Kbps, MPEG-2 16 Kbps - 160 Kbps) WAV iOS version of rekordbox: MP3 and AAC only USB Storage Support FAT FAT32 HFS+ MIDI Control Yes ProDJ Link Yes KUVO ready Yes Anti Vibration Yes Auto Standby Yes rekordbox Yes Width 320 mm Height 106.5 mm Depth 405.7 mm Weight 4.7 kg Processor Wolfson DAC processor Soundcard 24 bit/48 kHz Frequency Range 4 - 20000 Hz Signal-to-Noise Ratio > 115 dB (JEITA) Distortion < 0.0018 % (JEITA) Audio Output Level 2.0 Vrms (1 kHz, 0 dB)

The original Pioneer CDJ200 CD player available for hire at our showroom in Melbourne. This compact player houses innovative features such as full-function MP3 playback, looping and a unique one button Beat Cutter. Plays CDA MP3 (MPEG-1 32Kbps - 320 Kbps, MPEG-2 16 Kbps - 160 Kbps)

Sometimes you just need to hire a proven workhorse. The DJM-600 is a powerful 4 channel effects mixer with such great versatility that it is one of the most popular mixers on the market. The DJM-600 boasts an intuitive range of Beat Effects and a multitude of channel and cross fader options. The mixer features an Auto BPM function as well as a broad range of beat effects that give you complete control over effect intensity. The mixer also works as a beat sampler, with recording and play modes. This means DJs can capture up to eight seconds of sound and play it manually, or use the Auto Loop Play to loop the sample seamlessly. The Stretch Play feature can be used to manipulate the tempo of the sample with the beat. Packed full of powerful effects and sampling functions, the highly durable DJM-600 remains a first-class choice for DJs the world over.

The PRO MIXER DJX900USB DJ Mixer merges intuitive operation with built-in digital effects processing for clean, transparent sound that will set your dance floor on fi re! This 5-channel ultra-low noise mixer features our 45 mm infinium “Contact-Free” optical Crossfader for a superior lifespan; state-of-the-art 24-Bit digital effects with advanced parameter control; built-in USB connectivity for communicating directly with your PC or Mac* computer – plus a host of other truly-professional appointments. Professional 5-channel ultra-low noise DJ mixer with stylish, black design 45-mm infinium “contact-free" optical crossfader with adjustable tension and fader curve for years of use State-of-the-art 24-bit digital effects with advanced parameter control Built-in USB interface for recording and playback of any digital music file. Works with your PC or Mac* computer—no setup or drivers required Intelligent dual auto-BPM counter with time and beat sync display 3-band kill EQ and precise level meters with peak hold function per channel Additional 3-way kill switches with extremely steep frequency separation Awesome adjustable XPQ stereo surround effect VCA-controlled faders for utmost reliability and noise-free performance Adjustable crossfader curve for all mixing styles Monitor function with master/cue balance control and split option Auto-talkover function with separate depth control

Need to hire an inexpensive CD player for your next event. Available for hire in our showroom in Melbourne.. CD & MP3 DJ Station ID3-TAG support Track- and Folder Search Scratch Function for CD & MP3 4 independent 5-seconds sample banks Samples pitchable, reversable 4 independent Cuepoint banks Oversized LCD-Displays for all functions Pitch range +/- 4/8/16/100% Pitch bend +/- 100 % Pitch lock & Auto-Cue Master tempo XXL jog wheel Seamless LOOP for CD & MP3 Frame search 1 bit technology Playing address anti-shock memory Elapsed/remain time display Sleep timer Instant playback from cue point Relay play Fader start play Digital output S/N ratio: 90 dB D/A converter_8-fold/1 Bit Dimensions: 348 x 106 x 246 mm Weight: 3,1 kg Note: images & descriptions for illustration purposes only (the final delivered product may vary from that shown or described)

Featuring 5 output channels and up to 11 input sources. Two channels accept both mic & line input, other channels are via stereo RCA. Two RCA inputs can be switched between phono and line level. Includes a three band graphic equaliser, individual fader volume controls for each channel, plus crossfader assignment across all channels. This allows for fading from one music source to another without interruption. A program cue selector allows a DJ to cue upcoming music tracks from any channel. Includes power supply. FEATURES 5 channels with 11 inputs Up to 3 mic or 8 line inputs Twin LED VU level displays 3 band EQ per channel Push button cue selection with CUE/PGM fader control Talkover & balanced input on Mic 1 XLR 3 pin balanced output Master, record and zone RCA outputs Master & zone level controls Replaceable crossfader Headphone output

Loaded with an amazing array of features and jawdropping effects, the DJM-800 gives you freedom of creativity and digital control at your fingertips. The DJM-800 is a powerful 4 channel 96kHz / 24 bit digital mixer that’s complemented by 61 assignable MIDI control channels. It features 'Harmonic Mixing’, a landmark innovation that detects a track’s key and automatically aligns it to the closest true key, removing inaccuracies created when adjusting the pitch. The DJM-800 displays a wide variety of effects, such as ‘filter’, ‘sweep’ and ‘crush’ effects through a highpass/lowpass filter, notch filter and bit crusher effect for all line channels. The effects automatically detect the BPM of the music and sync to the beats. In conjunction with the additional Digital Beat Effects, 50 combinations of effects are possible. The DJM-800 has a high rigid chassis for minimizing unnecessary vibration that could adversely affect sound quality. It also incorporates a dual-shield structure for eliminating entry of digital noise and a high performance power supply.

This is it, industry standard Pioneer DJM900 NXS professional DJ mixer. available to hire individually or combine it with the Pioneer CDJ2000 NXS for a unrivaled DJ experience. This mixer is equipped with a 32-bit A/D converter to digitise and enhance sound quality for all outputs, while the 32-bit digital signal processor suppresses digital noise. Even analogue noise is reduced through balanced hybrid operation amps and output circuits. With Pro DJ Link you can connect multiple players, turntables or laptops via LAN connection and share a single source. Combine this with rekordbox to access pre-prepared loops and cues, sync the beat with the master deck, and access a host of advanced pro-DJ features.

Have your own turntables .. but need a pair of cartridges . These are a great replacement. Available for hire from our showroom in Melbourne. We have a variety of cartridges available. Different brands and styles depending on you use..

Need a CD Player witch pitch control and reverse play. Inexpensive to hire and ready to play.. Touch Sensitive Jog Wheel for real-time Scratching Effects; Scratch, Echo, Filter, Brake, Flanger, Phase, Pan, Transform 10 Second Anti-shock Buffer Memory Reverse Play Master Tempo (key control) 4 memory Banks for Sampler and Cue The CDS6 Ultima is the new top of the range single CD Player, packed with the features demanded by todays DJ community. Built on DSP Technology the interactive "AQ-Touch" touch sensitive jog wheel allows you to real-time scratch just like vinyl, along with 8 effects and a built in sampler it allows the creative DJ to open a whole new world in mixing technology. The New CDS6 Ultima, apart from its impressive scratch feature, hosts many more impressive features that will appeal to virtually every DJ in the world. The CDS6 Ultima has 8 built-in digital effects that are linked to the BPM counter to allow the DJ to ‘Beat-Sync’ the effects at the touch of a button, or the effects can be manually adjusted using the parameter time and the parameter ratio. The DJ can also overlay the effects one on top of the other to create even more effects. The CDS6 Ultima has a built in sampler that will allow the DJ to program samples that can be either used on their own (with or without the disc inserted) or used as an overlay on the music playing. The DJ can adjust a samples volume and pitch range separately from the music; these samples can also be saved to the player’s memory and recalled later when the sampled disc is inserted. The large Blue LCD display gives a visual indication of the position of the CD in conjunction with the jog wheel when scratching. It also displays the pitch shift position, BPM, Time and buffer bucket (an indication of the anti-shock memory). The Player has a wide range of control over the pitch with the option of ±4,8,16 and the ultimate 100%. It also has ‘Master Tempo’ allowing the DJ to lock the pitch of a track while being able to adjust the tempo.

Need to hire a CD player for your next event. We had a selection of CD players available to hire in Melbourne. Choose from MP3 players, single CD players or multi CD players.

PLAY AND RECORD VINYL WHEREVER YOU ARE Listening and recording vinyl to your computer is a breeze with the PT01 USB. This portable turntable is tough and durable, so you can take it with you anywhere. The PT01 USB comes with a built in loudspeaker and pitch control (±10%) to play your favorite 33 1/3, 45 and 78 RPM records. The hard dustcover protects the PT01 USB and has a carrying handle for convenience. RECORD YOUR VINYL TO PC Take your precious vinyl collection and convert your music over to .wav or mp3 with the free downloadable EZ Vinyl Converter software. Works perfectly on either Mac or PC. With EZ Vinyl Converter software, your music is separated into individual tracks directly to your iTunes library. Preserve your vinyl collection forever! SOUND OUTPUTS In addition to the built-in speaker, you can send your music to powered speakers via the RCA line-level outputs, and you can also enjoy private listening with your headphones via the 1/8” headphone jack.

The Power Dynamics PDM-D301BT is an ultra compact 3-Channel USB PA Mixer designed for portability and flexibility. The mixer features a clean mic preamp, line input and integrated USB soundcard. Allowing you to connect directly to your PC or MAC. Perfect for musicians and solo artists wanting a compact mixing solution for their performances or rehearsals. Also featured is a Bluetooth receiver that allows you to pair and wirelessly stream your favourite track directly to the mixer. Further, the mixer has a 2-band equaliser on the mic and line inputs for High and Low tone control. The perfect mixer for any small venue, musician, or solo artist wanting a compact and easy to use mixing solution for their audio. Ultra compact 3-channel PA Mixer USB connectivity for audio playback Integrated Bluetooth player BUS powered, USB cable included 2 Band equaliser for High / Low adjustment Easy to navigate design Frequency Response: 10Hz – 55kHz Equalizer: 2 Band (+/- 15dB) Inputs: 1x Combo Jack / XLR (mic), 4 x RCA (line), 1x 1/8″ Jack (mic) Outputs: 2x RCA (main), 1x 1/8″ Jack (headphones) Other Connections: Bluetooth reciever, USB Power supply: BUS powered (5V DC, 500mA) Dimensions: 136 x 98 x 34mm Weight: 0.48kg

The compact XENYX 1202FX mixer allows you to effortlessly achieve premium-quality sound, thanks to its 4 onboard studio-grade XENYX Mic Preamps and ultra-musical “British” channel EQs. Add to this our 24-Bit, dual engine FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects – and the 1202FX becomes an incredibly versatile mixer for your live performances. Premium ultra-low noise, high headroom analog mixer 4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps Neo-classic “British” 3-band EQs for warm and musical sound Studio-grade stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects FX send control per channel for internal FX processor and/or as external send Main mix outputs plus separate control room, phones and stereo CD/tape outputs CD/tape inputs assignable to main mix or control room/phones output

20-Channel Mixing Console: Max. 16 Mic / 20 Line Inputs (12 mono + 4 stereo) / 4 GROUP Buses + 1 Stereo Bus / 4 AUX (incl. FX) For a more precise control and enhancement of your sound, XU models of the MG Series come equipped with a suite of Yamaha's renowned SPX effects. Featuring high-resolution Chorus, Flanger, Distortions, Reverb and Delay, all with editable parameters, these are the same multi-effects processors used on Yamaha's high-end mixing consoles, giving you the tools you need to elevate your mixes to a higher plane. When was the last time you heard guitar without EQ or a completely unprocessed vocal on one of your favourite songs? Probably never. Yamaha mixers are famous for their flat response and sonic purity, but it often takes more than a perfectly-captured instrumental performance or vocal to achieve a professional-sounding mix. Equipped with some of the same state-of-the-art functionality featured on Yamaha’s high-end consoles, the MG Series gives you the tools you need to produce high quality sound that is uniquely your own. Features 20-Channel Mixing Console Max. 16 Mic / 20 Line Inputs (12 mono + 4 stereo) 4 GROUP Buses + 1 Stereo Bus 4 AUX (incl. FX) “D-PRE” mic preamps with an inverted Darlington circuit 1-Knob compressors High-grade effects: SPX with 24 programs 24-bit/192kHz 2in/2out USB Audio functions Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter Includes Cubase AI DAW software download version PAD switch on mono inputs +48V phantom power XLR balanced outputs Internal universal power supply for world-wide use Rack Mount Kit Included Metal chassis Dimensions(W×H×D): 444 mm x 130 mm x 500 m (17.5" x 5.1" x 19.7") Net Weight: 7.1kg (15.7 lbs.)

18-Channel, 12-Bus Digital Mixer for iPad/Android Tablets with 16 Programmable Midas Preamps, Integrated Wifi Module and Multi-Channel USB Audio Interface iPad*/Android* tablet controlled 18-input digital mixer for studio and live application 16 award-winning Midas-designed, fully programmable mic preamps for audiophile sound quality Built-In Tri-Mode Wifi router for direct operation?no need for external routers 18 x 18 channel, bidirectional USB interface for direct recording on iPad etc. Revolutionary Dugan*-style Auto-Mixing automatically manages microphone gain sharing Award-winning X32 effects rack featuring 4 stereo FX slots including high-end simulations such as Lexicon 480L* and PCM70*, EMT250* and Quantec QRS* etc. 100-band Real Time Analyzer (RTA) for all channel and bus EQ?s ULTRANET connectivity for Behringer?s P-16 Personal Monitoring System* Rack ears and protection bumpers included for flexible rack and onstage applications 6 aux and main LR buses with inserts, full dynamics processing and 6-band parametric or 31-band graphic EQ 6 XLR aux outputs and 2 XLR main outputs plus phones connector 40-Bit floating-point DSP features ?unlimited? dynamic range with no internal overload and near-zero overall latency Free iOS, Android and PC/Mac*/Linux* apps available for remote operation via Ethernet, LAN or WiFi MIDI In/Out allows controlling the mixer via MIDI equipment (incl. Mackie Control* protocol) or for use as a USB MIDI interface (future firmware) Future firmware updates, incl. new FX ?Plug Ins?, downloadable from behringer.com free of charge Internal switch-mode power supply for noise-free audio and low power consumption

The EZ-M 16x2 is an ultra compact mixing console that is suitable for a wide range of applications. The 2 mono channels have XLR and balanced/unbalanced TRS inputs with individual gain controls and a clip LED. Each channel offers 2 band EQ, pan and a rotary level control. 4 stereo channels are available using balanced/unbalanced TRS inputs with a balance control and a rotary level control. The master section includes main outputs with balanced TRS connectors and a 2-track input/output section with 1/8"mini-jack and RCA connectors. The headphone output has both 1/4" TRS and 1/8" mini-jack connectors for compatibility with all headphones without the need for adapters. The master level and headphone output have rotary level controls, a stereo 4 stage LED meter enables you to ensure correct gain structure is applied. The feature set and compact dimensions suit the EZ-M 16x2 as a main-mixer or sub-mixer for fixed installations, live sound, home studio, and many in other applications. 2 Mono balanced/unbalanced mic/line input channels with 2 Band EQ Input GAIN controls on mic/line channels CLIP LED's on mic/line channels 4 Stereo channels with balanced/unbalanced 1/4" TRS jacks. 2 Track stereo inputs and outputs with stereo 1/8" and dual RCA jacks 2 Track destination switches (2TK TO MAINS, 2TK TO PHONES) with level control Separate MAIN MIX and PHONES outputs with level controls Stereo 4 segment LED meters Stereo 1/8" and 1/4" headphone outputs

Features High-Performance 22-input small format analogue mixers with onboard effects Iconic Soundcraft® Ghost mic preamps with ultra-low noise performance Renowned Soundcraft® Sapphyre British EQ with sweepable mid-bands per channel Lexicon® Effects Engine featuring award-winning Reverbs, Delays, Choruses and Modulations dbx® Limiters (High-ratio Compressors) on input channels 2-in/2-out USB audio playback and recording* Switchable Hi-Z inputs for guitars, basses and other instruments Hi-Pass Filters (low-cut) and 48V Phantom Power on all mic channels Comprehensive Soundcraft® GB Series audio routing Smooth premium-quality faders Robust metal construction for tour-grade build quality and reliability Internal universal power supply * USB Interface Compatibility: PC: Supports Windows 7, Windows 8 and Windows 10. Mac: Supports Mac OS 10.7.x Lion through 10.11.x El Capitan

32 Channel Mixing Console The SR32•4 VLZ PRO has 28 XDR-equipped mic/line channels plus two special line level channels. Equalization on the SR-VLZ PRO Series mixers is very versatile. Besides the fact that our Hi and Lo shelving EQ are centered at useful frequencies – 12kHz and 80Hz, respectively – the SR24•4-VLZ PRO and SR32•4-VLZ PRO have sweepable midrange EQ (on mono channels). You can center the midrange anywhere from 100Hz to 8kHz, low enough to use as a second low frequency EQ, and high enough to use in the high frequency range. (Stereo channels on both mixers have 4-band EQ, with 12kHz and 80Hz Hi and Lo shelving EQ, and two fixed mids at 3kHz and 800Hz.). And a low cut filter (on mono channels) centered at 75Hz allows you to cut out mic thumps and wind noise that can enter your mix and rob you of amplifier power. The SR-VLZ PRO Series mixers have six aux sends per channel, with the flexibility to handle multiple chores at once. Two of the aux sends are pre-fader, so you can use them for monitor sends during a live session. Two other aux sends are post-fader, which you would want for effects during studio tracking and mixdown. But get this: the final two aux sends are switchable to pre- or post-fader! So you can have 4 pre-fader aux sends, or 4 post-fader aux sends, whenever you need them. Along with great channel EQ, SR-VLZ PRO mixers come with factory "Air." This peaking EQ circuit, centered at 16kHz, enhances guitars, vocals, percussion, whatever, giving a gentle "lift" to the extreme high end. The result is extra detail and fidelity in the high end. Sound On Sound magazine said about Air: "[The] Air controls turned out to be far more effective in adding top-end clarity than you might first imagine – it's almost an 'exciter' kind of effect, but without the harshness." When you put all of the SR-VLZ PRO Series' features and enhancements together, you'll have two highly-affordable sound reinforcement mixers with what it takes for both live and small studio applications. Features Premuim XDR mic preamps (20 on the SR24•4 VLZ PRO, 28 on the SR32•4 VLZ PRO) 4 submix buses 6 aux sends (2 pre, 2 post, 2 switchable pre/post) 3-band EQ with sweepable mids (4-band fixed EQ on stereo channels) 75Hz Low cut filter on all mono channels "Air" EQ on sub buses Talkback section with level control, LED, and separate rear XLR input "Double-bused" sub outs for eight track recording without repatching Inserts on all mono channels and subs AFL/PFL solo on all channels (globally switchable) 60mm log-taper faders for consistent fades Balanced XLR and 1/4" main outputs Additional mono XLR main out with level control Balanced inputs and outputs (except phones, inserts, RCAs) Built-in power supply 12V BNC lamp socket

ZED-10FX is an amazing little desk for small band mixing. It is ultra portable for carrying to the gig, and can be used for recording live or in the studio. It comes with configurable USB audio in/out making it easy to capture stereo recordings. Guitars can be plugged in directly to the mixer using the specially designed high-impedance inputs, while the mixer has two stereo inputs for MP3/CD players or keyboards. Equipped with professional XLR stereo outputs and a flexible monitoring section with headphone and speaker feed outputs. 4 mic/line inputs, 2 with Class A FET high impedance inputs Neutrik mic XLR Neutrik 1/4 inch jacks 3 band EQ with MusiQ 1 pre-fade Aux send 1 FX send Sound image pan Illuminated PFL indicator Stereo returns & playback All inputs with level control 12 bar meters Responsive 3-band, swept mid EQ with MusiQ 2 stereo sources with MP3 player compatibility Separate 2-track record outputs Stereo playback input for 2-track replay XLR main stereo outputs with inserts Comprehensive monitoring Configurable USB stereo audio in/out Stereo monitor outs 48V microphone phantom power DI level switching for sub mixing

Soundcraft EFX12 Total # Of Inputs 14 Mic/Line Inputs 12 Stereo Line Inputs 2 AUX Sends 2 (1 configurable aux send, and if the effects are turned off the dedicated effects aux can be used as second aux send) AUX Returns 2 Inserts Every channel and master 2 Trk Master I/O Yes Monitor Outputs 2 x 1/4" TRS 1 x 1/4" headphone Independent volume control for headphone and monitor outputs 150 Ohm or higher headphones recommended EQ Section 3-Band EQ with a swept mid on all 12 mono inputs 3-Band EQ on the 2 stereo inputs Effects 32 programs of reverb, delay, chorus, flanger, phaser, tremelo, rotary, and vibrato. Solo/Mute Solo/PFL buttons on every channel Mute buttons on every channel Channel Level Control 60mm Faders Trim/Gain Control 12 GB30 mic preamps Mic input +15dBu max Line input +30dBu max Stereo input +30dBu max Phantom Power Yes, +48V Metering 10 segment LED output metering (with PFL buttons on every channel to monitor the independent signal and check its level on the meter) Frequency Response 20Hz - 20kHz, +/- 1.5dB Signal-to-Noise Ratio Mic Input E.I.N. (maximum gain) -127dBu (150 Ohm source) Aux, Mix, and Masters (@ 0dB, faders down) -85dBu Total Harmonic Distortion (THD) Mic Sensitivity -30dBu, +14dBu @ Mix output < 0.02% @ 1kHz Dimensions 17 x 3.6 x 14.3" (432 x 91 x 362 mm) Weight 12.8 lbs (5.8 kg)

The reference-class MDX2600 is a marvellous dual-channel Expander/Gate/Compressor/Peak Limiter that is ideal for: compressing mono/stereo signals and providing virtually inaudible noise suppression, without loss of high frequencies; increasing vocal presence and energy; and limiting, or smoothing out extremely-high signal peaks. Additionally, the MDX2600 features an integrated Dynamic Enhancer, De-Esser, Low-Contour filter and our revolutionary, switchable Tube simulation – for the extra warmth and transparency of classic tube circuitry. Put simply, the MDX2600 can do amazing things for your vocals or instruments – providing virtually everything you need for studio-quality dynamics processing! Features Switchable IKA (Interactive Knee Adaptation) program-adaptive compression circuitry Integrated De-esser with switchable male/female voice recognition IGC (Interactive Gain Control) peak limiting circuitry Switchable dynamic Enhancer for brilliant, lively audio even with heavy compression IRC (Interactive Ratio Control) expander/gate circuitry Switchable Tube simulation for the extra warmth and transparency Automatically or manually adjustable attack and release times Switchable Low contour filter prevents "pumping" Stereo couple function with independent output level settings Switchable side chain input with monitor function Separate 12-segment LED metres for input/output levels and gain reduction Dedicated "traffic light" Threshold and De-esser level displays Servo-balanced inputs and outputs with ¼" TRS and gold-plated XLR connectors Relay-controlled hard bypass switch with auto bypass function Internal switch-mode power supply for noise-free audio and low power consumption

Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB Patent-pending PeakPlus™ Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal Four segment LED bargraph for BOTH Gain Reduction AND Output Level Status LEDs offer visual feedback for all settings on the front panel Input Connectors 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip Input Type Electronically balanced/unbalanced, RF filtered Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm Max Input >+21dBu balanced or unbalanced CMRR >40dB, typically >55dB at 1kHz Output Connectors 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip Output Type Impedance-balanced/unbalanced, RF filtered Output Impedance Balanced 200 ohm, unbalanced 100 ohm Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) Bandwidth 20Hz to 20kHz, +/-0.5dB Frequency Response <10Hz to >50kHz, +0.5/-3dB Signal-to-Noise (NR In: +/-6 and +/-15dB ranges) >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth Dynamic Range (NR In: +/-6dB and +/-15dB ranges) >120dB, unweighted Signal-to-Noise (NR Out: +/-6dB range) >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth Dynamic Range (NR Out: +/-6dB range) >112dB, unweighted Signal-to-Noise (NR Out: +/-15dB range) >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth Dynamic Range (NR Out: +/-15dB range) >108dB, unweighted THD+Noise <0.04%, 0.02% typical at +4dBu, 1kHz Interchannel Crosstalk <-80dB, 20Hz to 20kHz Noise Reduction Up to 20dB of dynamic broadband noise reduction NR Switch Activates dbx Type III Noise Reduction Bypass Switch Bypasses the graphic equalizer section in the signal path Low cut Switch (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter Range Switch (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range I/O Meter 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu Gain Reduction Meter 4-LED bar graph (all Red) at 0, 3, 6, and 10dB Indicators NR Active (Yellow); EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red) Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz Power Consumption 28W Power Connector IEC receptacle Dimensions 5.25" H X 19" W X 7.9" D (13.335cm x 48.3cm x 20.1cm)

Phonic’s DB3 is an ultra-rugged Direct Box for performers in large venues. DB3 accepts a wide range of unbalanced signals, and processes these signals to be fed safely to mixers Professional, multi-functional DI box for all live and studio applications Ultra-flat frequency response Rugged metal housing with tough rubber corners for protection Internal battery automatically de-couples when using phantom power Low noise op amps for superior sound Gold-plated XLR connectors and phone jacks for input and link output

The ultimate analogue music player .. Reel to Reel Tape Player. Yes we have these available for hire in Melbourne..

Need to rewind .. back to an earlier time.. Dust off those cassettes and get the party started.. We a have a full range of cassette players available for hire in Melbourne..

When the early digital world is better.. you can hire a Mini Disc Player from our Melbourne location.

Vintage Audio Hire .. Need a mixer to suit an era .. The Tapco 6200B is a stereo high level/microphone mixer which can amplify and equalize up to six sources and send them through either of two identical output sections by means of a continuously variable pan pot. In addition, each channel can be fed to an external effects device such as a reverberation unit or echoplex, or to a monitor amplifier by means of the Effects Send control on each channel. Effects can also be added selectively to each individual channel by means of the Channel Patching jack on the rear panel. The output sections contain the rumble filter and high-boost functions, effects return, and output metering

Included in this hire is everything you need to make you a karaoke star. The Apple iPad running our custom Real Karaoke® App, comes preloaded with 6749 select Karaoke tracks and wireless streaming to an external Karaoke Display via the included Real Karaoke® Box. Included are Karaoke LCD Display, Real Karaoke® Streaming Box, 2 high quality dynamic microphones, speaker and microphone stands, all leads and songbooks.

Vintage Audio Hire .. Walkman .. Personal Cd or Tape Player ? Great for Props .. Various Models available

The CR Lite Magik Bar™ is a new moving 1 metre bar. It features 8 x 10W RGBW CREE LEDs on 2 separate moving battens creating great ceiling and floor filling washes. Can be used as a standalone product or controlled via DMX and is Pixel mappable. With added features like Power in/out, the CR Lite Magik Bar™ is an ideal unit for use as an indoor up lighter or for the on the road DJ. Model number: L26456 Total LEDs: 8 x 10W RGBW CREE LEDs Colours: Red, Green, Blue, White Beam Angle: 3° DMX operations: YES DMX channels: 1, 12, 16, Master slave: YES Power Linking: YES LCD display: YES Internal programmes: Auto, Static Colour, Sound Active, Built in Program, Master Slave Sound operation: YES Mounting: Double yoke bracket Construction: Die Cast Steel Connections: Piggy Back Mains plug and captive cable, DMX IN (3 pin XLR) DMX OUT (3 pin XLR) Power requirement: 240V AC 50/60Hz Power consumption: 80w Dimensions WxDxH: 1065 x 95 x 177mm Weight: 8.7kg

The CR-Lite Reaktor is a 3-in-1 light effect that combines 12 powerful white strobe LEDs with a 130mW RG laser module and a double RGBWA moonflower effect. All 3 effects can be selected separately in auto or music controlled programs. It can also be controlled by DMX to give you full control of all features. The RG laser has many versatile grating & burst effects and is equipped with a key lock and remote interlock. The strobe has 12 sections with different preprogrammed patterns. One moonflower has RGB colors and the other is BWA. The CR-Lite Reaktor combines 3 great effects with vivid colors to bring you a total lightshow in a compact housing. Features: The perfect mixture of 3 LED lighting effects in one compact housing • Ultra-bright, quad-color moonflower, red/green laser and white strobe effect • Dual LED moonflowers fill the dancefloor with multi-colored spinning beams • Red and green laser produces thousands of razor sharp beams • Create energy with included ultra-bright LED strobe ring with built-in motion effects • Convenient control of color and program output from the display, remote, and DMX • Flexible control using automated and sound-activated programs, Master/Slave or DMX modes • Save time running cables and extension cords by power linking multiple units Technical Parameter： Power input: 100-240V 50/60z Power consumption: 32W Control: Auto, Sound, Master/Slave, DMX DMX Channels: 2, 11 Control Display: 4 Digits LED Power Connection: IEC in- & output Data Connector: 3 pole XLR (In/Out) Dimensions: 290 x 196 x 98mm (excl brackets) Weight: 2,4kg Incl accessories: 2 Keys, Interlock test connector LED effect Colors: R,G,B & B,W,A Power: 6x3W Current: 300mA Laser effect Laser Color: Red, Green Laser Power: 130mW (100mW 650nm Red, 30mW 532nm Green) Laser Class: 3B Safety Features: Key switch, Interlock, Safety eye Laser Safety: EN/IEC 60825-1: 2007 Strobe effect LED: 12x 0,5W White Strobe: 0-30Hz

LED 4 Shot Moonflower 4 x Moonflower effect lights built into one. Multiple dots of light. Sound activated.

If you can´t choose between a moonflower effect or a laser effect, this is what you need. The CR-Lite Fusion is another creative 3-in-1 light effect that combines colorful moonflower, red/green laser module and strobe effect. The 3 effects can be selected separately in auto or music controlled programs. It can also be controlled by DMX to give you full control of all features. Features: 3-IN-1 LED light that combines colorful moonflower, white strobe effect and red/green laser module. Maximize color options with high output red, green, blue, white and amber LEDs Create energy with included ultra-bright LED strobe ring with built-in motion effects Dual lens system makes razor sharp and ultra bright beams Flexible control using automated and sound-activated programs, Master/Slave or DMX modes Convenient, wireless non-DMX control using the optional IR control Operation allows for separate color and program control Save time running cables and extension cords by power linking multiple units Specifications: Power Input: 100-230V 50/60Hz Power Consumption: 66W Light Source: 20 x 1W LED's (Red, Green, Blue, White, Amber) Laser Power: 100mW 650nm Red, 30mW 532nm Green Laser Class: 3B Safety Features: Key switch, Interlock LED Strobe: 12 X 0.5W White SMD LEDs Control: Auto, Sound, Master/Slave, DMX, IRC DMX Channels: 3ch, 13ch Control Display: 4 Digits LED Power Connection: IEC In & Out Data Connector: 3 pole XLR (In/Out) Dimensions: 294 x 173 x 294mm Weight: 4,1kg

Tri LED Effect Light 3 x Moving mirrors scan projected beams across the room Auto Sequence Changing Patterns Available for hire from our showroom in Melbourne. Combine it with a smoke machine to create an array of physical beams moving through the air.

The CR Lite Magik Bar™ Wipeout 001A RGBW is an innovative concept and brings continuous rotating to LED Bars in a compact housing but still with a surprisingly high light output. The Wipeout 001A RGBW is equipped with 4 RGBW LED's. The special lenses ensuring tight and bright beams with a beam angle of just 3˚. Each pixel can controlled individually. The Wipeout RGBW can be controlled by DMX but can also run standalone, sound controlled or run master/slave. Specifications Light Source LED System: 4 x 10W RGBW LEDs Output@2m: 7000lux Electrical Power Supply: AC 100-240V 50/60 Hz Power Consumption: 72W Control Control Mode: Auto/ build-in programs, Master/slave, DMX DMX channels: 1, 22, 26ch Optical system Dimmer: 0-100% Strobe: 0-20Hz Beam Angle: 3° Physical Dimensions: 555 x 95 x 210 mm Weight: 6,8 kg Housing: black painted metal and ABS plastic Color: Black Power Connectors: Blue/White Power connector Data Connectors: XLR 3&5 pole Cooling: Convection Safety Operation temperature: -10~40°C IP-Rating: IP-20

Get obsessed with breathtaking mid-air effects from Obsession, the compact LED effect light that projects ever-changing, multicolored rotating gobos. Separate color and gobo wheels allow you to blanket the room with ever-changing patterns. Generate synchronized shows in Master/Slave mode with built-in automated programs or use other control options like stand-alone, or DMX modes, or optional IRC-6 remote control.

LED Matrix Light Multiple dots of light, dance and fill with the music. Sound activated. Project onto the ground and make your own dance floor.

Audio activated multi coloured lighting effect. Projects coloured beams of light that rotate around the room. Available for hire from our showroom in Melbourne. Combine it with a smoke machine to create an array of physical beams moving through the air.

This compact LED lighting provides a dual LED moonflower effect with wide enough coverage to fill the room. It is powered by 112 red, green and blue LEDs and offers built-in and sound-activated programs. Specification： Power supply: AC220-240V Power：20 W LED source: 112 x 5mm LEDs(32 Red, 48 Green, 32 Blue) Built-in sound active programs Beam angle: 72 degrees Long life LEDs: 50,000 hours Dimension: 258x248x196mm Net weight: 3.5 KG

This 4 lens LED moonflower effect with sharp Red, Blue, Green and White high output color beams, produces unique LED patterns that can be projected on a dance floor, wall or ceiling. This LED effect lighting with 9 built-in auto mode programs, sound active mode with speed control, Master/Slave and DMX control mode also available. Specification： Power supply: AC220-240V Power：20 W 256 Ф5 LEDs(64 Red, 64 Green, 64 Blue, 64 White) 4 operational modes: Sound active, 9 built-in auto programs, DMX -512, Master/Slave mode 4-button LCD Display or rear panel Linkable via 3-pin XLR cable Wide beam spread covers a large area Beam angle: 24 degrees(high), 94 degrees(wide) Long life LEDs(100,000 hr. rating) DMX channels: 4 Dimension: 434x289x205mm Net weight: 3.3 KG

The CR-Lite Razor ST is a 2-in-1 light effect that combines 16 powerful white strobe LEDs, with a 4x3 Watt RGBW LED effect. The 2 effects can be selected separately in auto or music controlled programs. It can also be controlled by DMX to give you full control of all features. The strobe has 16 sections with different preprogrammed patterns. All RGBW colors can be selected individually or in many preprogrammed combinations. If you have multiple Razor ST's the master/slave function can be used to create a synchronized lightshow. If you need one solution to get a Strobe and a colorful LED light effect with full control of all features, the CR-Lite Razor ST is what you are looking for. Specifications General Power input: AC 100-240V 50/60z Power consumption: 28W Control: Auto, Sound, Master/Slave, DMX DMX Channels: 4 Control Display: 4 Digits LED Power Connection: IEC in- & output Data Connector: 3 pole XLR (In/Out) Dimensions: 190 x 258 x 182mm (excl brackets) Weight: 2 kg LED effect Colors: RGBW Power: 4x3W Current: 300mA each Strobe effect LED: 16x0.5W White Current: 300mA

Add some colour and movement to you next function. Based on the vintage 80’s rotating helicopter light, this modern replacement, changes colours while rotating beams of light around the room. Use the inbuilt programs or combine it with an optional DMX controller to choose the combination of colour and movement desired. Q6 is a multi-effect effect light designed to dazzle and energize the dance floor. It features adjustable RGBW beams, a round SMD strobe and a red/green pattern laser on a rotating base with continuous pan rotation creating unique and amazing effects. Its narrow, razor-sharp beams of RGBW light create astonishing aerial effects and the rotating red and green laser produces thousands of razor sharp beams that cover a large area. Helicopter Q6 is easy to control using automated and sound-activated programs, master/slave, DMX or an optional IRC-6 remote. Available for hire from our showroom in Melbourne. Combine it with a smoke machine to create an array of physical beams moving through the air.

Mushroom is a classic plug-and-play effect light that generates hundreds of sharp, multi-colored beams. Built-in automated programs and sound activation modes mean no programming is needed Available to hire from our showroom in Melbourne. Combine it with a smoke machine to create an array of physical beams moving through the air.

The LED Trifecta is the centerpiece DJ fixture that shoots beams in three directions with tri-colored LEDs. With a wide coverage angle of 155-degrees, the Trifecta is illuminated by three tri-colored, total 9W LEDs with seven color combinations. It offers variable electronic strobe in any color combination, built-in sound and automated programs. A variable-speed effect motor controls back-and-forth motion. Specification： Power supply: AC220-240V Power：20 W 3 * 3W Tri-Color LEDs 4 operational modes: Sound active, Auto, DMX -512, Master/Slave mode Individual control of red, green and blue 3-channel DMX-512 LED centerpiece Beam Angle: 155 degree Variable electronic strobe in any color combination Back-and-forth motor effect with variable speed DMX channels: 6 Static colors with or without DMX controller Built-in automated programs Built-in sound activated programs Dimension: 362x328x312mm Net weight: 6.4 KG

Swarm is a wildly colorful, four-channel DMX-512 LED effect light with adjustable strobe speed for any of its seven color combinations produced by a total of 9W of LED. Motor direction and speed control are also adjustable. Additional features include built-in automated and sound-activated programs via master/slave or DMX.

The LED Moonflower is a groundbreaking line of highly portable, DMX-controllable LED-fitted beam effects. This mode of LED effect lighting features a compact and functional which is integrated into our home party series. Single moonflower has silent operation mode, 6 channels DMX control with adjustable strobe speed. Specification： Power supply: AC220-240V Power：25 W LED source: 84 x 5mm LEDs(36 Red, 24 Green, 24 Blue) Operational modes: Built-in sound active programs, built-in auto programs, DMX, Master/Slave mode 9 built-in Auto programs Linkable: via 3-pin XLR cable Individual control of three colors. Beam angle: 45 degrees Long life LEDs: 100,000 hours DMX channels: 6 Dimension: 245x145x110mm Net weight: 3.5 KG

Multicoloured beams of light that dance to the music Multi programs inbuilt Perfect for any event, the LED Starball is an efficient and powerful LED lighting effect that will move to the beat and fill your dance floor or room with a blast of colourful light beams. Features : 6 Colour LED's (3W Red, Green, Blue, White, Yellow, Amber) Sound Active Mode Auto Mode 240v Mains Powered

Rotosphere Q3 is an easy to use mirror ball simulator with high-power, quad-color LEDs. 3 LED zones emit up to 3 different colors simultaneously and slow rotation speed creates a romantic atmosphere. Rotosphere Q3 is easily controllable with the optional IRC-6 remote and the digital display even allows you to set a color and rotation speed without any controller. The Rotosphere Q3 is suitable for every event in black housing. Mount Rotosphere Q3 to truss with the included bracket or place it on a stand as a centerpiece. DMX Connectors: 3-pin XLR Light Source: 5 LEDs (quad-color RGBW) 7 W, (2.4 A), 50,000 hours life expectancy Strobe Rate: 0 to 20 Hz Coverage Angle: 360° Power Linking: 12 units @ 120 V; 21 units @ 230 V Input Voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging) Power and Current: 46 W, 0.7 A @ 120 V, 60 Hz 44 W, 0.4 A @ 230 V, 50 Hz Weight: 8.6 lb (3.9 kg) Size: 11 x 13 x 17 in (266 x 319 x 419 mm) Approvals: CE Rotation Speed: 2 – 19 RPM

This new 3 in 1 unique light combines laser, strobe and disco lighting effect together to make a unique lighting effects. Total 150mW lasers mix creates 8 different patterns, which brings you fantastic laser effects. Red, Green, Blue, White, Amber 5 pcs of 3W led light feature inside to created romantically disco lighting effect. High-output white led build around the light to light up your party. It is perfect for stage, wedding, Mobile DJ and night club. Laser Source： DPSS Green Laser, Red Laser Diode Laser Power： 50mW@532nm(adjustable) Green,100mW@650nm Red Power Supply： AC100V～240V,50Hz- LED Source: 8 Pcs of 1W White LED, Red, White, Blue, Green, Amber 3W LED Rating Power： 10W DMX： 9 Channels Laser Safety： Class 3b Dimension： 225mm*298mm*310mm Gross Weight： 4.5kg

The Beamz Terminator IV combines the power of 3 great effects into a single fixture, perfect for your next party or event. The double RGB moonflower creates colourful effects that, combined with the laser, light up any dance floor. Finished off with a strong white stroboscope that strobes and chases to create extra energy in the room. Supplied with built in auto programs, including a sound active mode for use out of he box. And can be DMX controlled for creating more dynamic effects. Power: 18W Laser: Red and Green Laser Class: 3B Laser: Green 50mW / Red 150mW DMX channels: 4 or 8 No. of LEDs: 66x RGBW + 12x 1W Colours: Red, Green, Blue, White Power supply: 100-240VAC / 50-60Hz Dimensions: 225 x 340 x 100mm Weight: 2.6kg

LED Fast Spinning moonflower, projectors discs spinning across the room

Rotating 1/2 ball shoots 34 sharp white LED Beams. Specifications: • Bright LED Starball similar to a mirrorball effect • Produces 34 crisp, bright white beams from one 3-Watt LED source • Use with or without fog • Beams cover a wide area Available for hire from our showroom in Melbourne. Combine it with a smoke machine to create an array of physical beams moving through the air.

he CR-Lite Mini Ball s an efficient LED lighting effect that will move to the beat and fill your dance floor or room with a blast of colourful light beams. Sound activated.

Multibeams of light change colour while rotating to audio. Available for hire from our showroom in Melbourne. Combine it with a smoke machine to create an array of physical beams moving through the air.

Vintage halogen Barrel lighting effect. Fills the room with moving coloured wash beams of light. Audio activated.

A small but effective effect producing an array of 4 small moon flowers of coloured & white light which spin back and forth, overlap and rotate together over a central axis to the beat of the music.

Moonflower lighting effect. Fills the room with moving coloured wash beams of light. Audio activated.

Beamer 6 FX is a multi-effect light that includes adjustable RGBW beams, a round SMD strobe and a red/green pattern laser that produces thousands of razor sharp beams. Large room coverage is possible by positioning each of the 6 RGBW beams independently. The ultra-bright LED strobe ring with built-in motion effects creates dynamic light shows. Beamer 6 FX features flexible control options including automated and sound-activated programs, master/slave, DMX or an optional IRC-6 remote. DMX Channels: 2 or 15 DMX Connectors: 3-pin XLR Light Source: – Beam: 6 LEDs (RGBW) 5 W, (2 A), 50,000 hours life expectancy – Strobe: 24 LEDs (White) 0.3 W, (0.1 A), 50,000 hours life expectancy – Lasers: 650 nm/100 mW (Red) laser diode, 532 nm/30 mW (Green) Strobe Rate: – Beam: 1 to 20 Hz – Strobe: 1 to 20 Hz Beam Angle: 3° Power Linking: 22 units @ 230 V Input Voltage: 240 VAC, 50 Hz Power and Current: 40 W, 0.3 A @ 230 V, 50 Hz Weight: 2.9 kg Size: 390 x 390 x 285 mm)

Drawing Star is the new member of Falling Star series. It is installed with double rotating burst grating which creates much wider diffraction angle, more symmetrical laser beam and better quality grating layer. Countless red and green laser beams will bring you the feeling of star space. Technical Parameter： Laser Power: 50mW-G + 100mW-R Laser Color: Green, Red and Yellow Rating Power: 25W Laser Modulation: TTL Modulation Signal, Frequency 0~1KHz Scan System: High speed step motor drive and grating scan. System Port: DMX512 input and output port Interlock Emergency switching port Control Mode: Inside 4 in 1 mode. DISCO Pub Sound control Mixture Standard DMX512 signal control Control Function: Precision Step motor to orientation. Multi laser work together without cable Demo Effect: Blanking rotating zoom retro flexion moving strobe, create light wall and light tunnel and cloud sea with the fog. Work Environment: 10～40℃Indoor Workplace: DISCO、 HIGH bar 、Pub 、Night Club 、TV Station、 Opera House、 Advertisement Size: 240x220x120mm Weight: 2.8kg

VINTAGE LIGHTING ORION

Surpass 7 1.2W laser projector could generate Double Independent Pattern Effect only with normal DMX controller. When both patterns are shown, the position, rotation, zooming color, speed, scanner limit, and so on could be independently controlled. With new Master/Slave mode, audio input stimulation and great new 30 KHz scanner, Surpass 7 II performs an unbelievable professional laser show. Technical Parameter： Laser Power: 300mW-G(650nm) + 500mW-R(532nm) + 400mW-B(450nm) Laser Color: 7 Color Rating Power: 75W Scan System: High speed step motor drive and grating scan. 30 kHz System Port: Operation Mode: DMX512 input and output port Interlock Emergency switching port Two Auto Modes, Two Audio Modes, DMX Control, Master/Slave, ILDA with laser show controller system Control Mode: Inside 4 in 1 mode. DISCO Pub Sound control Mixture Standard DMX512 signal control Control Function: Precision Step motor to orientation. Multi laser work together without cable Demo Effect: Blanking rotating zoom retro flexion moving strobe, create light wall and light tunnel and cloud sea with the fog. Work Environment: 10～40℃Indoor Workplace: DISCO、 HIGH bar 、Pub 、Night Club 、TV Station、 Opera House、 Advertisement Size: 515x204x460mm Weight: 15kg

Stunning Club Lighting Effect, which fills an entire room or hall with moving coloured light. The main beams form a large rotating circle (Moonflower). Secondary beams fan out from the main circle at a 180-degree angle. The light beams all change colour and move, in time to the music.

The V1 Bello features a super bright discharge lamp. Produces flat beams of coloured light that rotate on X-Y Axis. Through smoke an almost solid looking wall of light scans any large venue.

Abstract Gladiator light effect hire. This unit features a combined colour/gobo wheel with 8 effects. Scanning beams of light left and right across the room.

Ball Size 16-Inch (400mm) Mirror Size 10 x 10mm Safety Loop No Dimensions 400 x 400 x 400mm (not including mounting loop) Weight 3 kg (excluding motor) Shine a pin spot towards them and get an explosive array of dots of light rotating across the room.

Ball Size 60-Inch (1500mm) Mirror Size 10 x 10mm Safety Loop Yes Dimensions 1500 x 1500 x 1500mm (not including mounting loop) Weight 113.8 kg (excluding motor) Shine a pin spot towards them and get an explosive array of dots of light rotating across the room.

Ball Size 12-Inch (300mm) Mirror Size 10 x 10mm Safety Loop No Dimensions 300 x 300 x 300mm Weight 1.8 kg (excluding motor) Shine a pin spot towards them and get an explosive array of dots of light rotating across the room.

Ball Size 40-Inch (1000mm) Mirror Size 10 x 10mm Safety Loop Yes Dimensions 1000 x 1000 x 1000mm (not including mounting loop) Weight 30.8 kg (excluding motor) Shine a pin spot towards them and get an explosive array of dots of light rotating across the room.

Ball Size 20-Inch (500mm) Mirror Size 10 x 10mm Safety Loop No Dimensions 500 x 500 x 500mm Weight 4.7 kg (excluding motor) Shine a pin spot towards them and get an explosive array of dots of light rotating across the room.

These smaller mirror balls are generally used for decorative purposes, They can be hung or placed as décor pieces within a room or art installation. Shine a pin spot towards them and get an explosive array of dots of light reflected into your room.

LED Followspot 120ST is a portable, LED followspot that emits a tight beam powered by a bright 120 W LED to highlight actors at far distances. Control options include DMX and manual modes and you can simplify professional fading with smooth LED dimming. Focus the light where it is needed using the mechanical iris to reduce the beam’s diameter and deliver silent operation with fast electronic strobe and no moving parts. Set up and tear down in seconds with the included tripod. Portable, 120W LED followspot emits a tight beam with a crisp edge Built-in CTO filter lowers color temperature to match tungsten lamps Set up and tear down in seconds with the included tripod Increase flexibility with DMX and manual control options Simplify professional fading with smooth LED dimming Focus the light where it is needed using the mechanical iris to reduce the beam’s diameter Includes portable tripod stand DMX Channels:3DMX Connectors:3-pin XLR Colours:7 + white split colours Light Source:1 LED (cool white) 120 W (30.6 A), 50,000 hours life expectancy Strobe Rate:0 to 16 Hz Illuminance:(14°): 16,060 lux @ 2 m (20°): 7,900 lux @ 2 m Input Voltage:240 VAC, 50/60 Hz (auto-ranging) Power and Current:176 W, 0.8 A @ 230 V, 50 Hz Zoom Angle:(manual): 14° to 20° Weight:7.5 kgSize:582 x 279 x 341 mm Approvals:CE Stand Height:0.8 to 1.2 m Iris (min):5° (at tightest zoom) Fits Tripod Sizes:34.75 mm

Great for parties and events, bring back the 70's. The table top versions make great table centre pieces Shine a pin spot towards them and get an explosive array of dots of light rotating across the room.

Ball Size 24-Inch (600mm) Mirror Size 10 x 10mm Safety Loop Yes Dimensions 600 x 600 x 600mm (not including mounting loop) Weight 9.8 kg (excluding motor) Shine a pin spot towards them and get an explosive array of dots of light rotating across the room.

Ball Size 30-Inch (750mm) Mirror Size 10 x 10mm Safety Loop Yes Dimensions 750 x 750 x 750mm (not including mounting loop) Weight 14.8 kg (excluding motor) Shine a pin spot towards them and get an explosive array of dots of light rotating across the room.

The industry standard instrument Shure SM57 microphone available for hire in Melbourne. Whether, a snare crack. An arpeggiated chord. A powerful saxophone solo. Whether on stage or in the studio, the notes that flow from your instrument connects your audience on a visceral level. And such sounds need a mic that can handle its strength. For every acoustic condition, the SM57 delivers the power of your playing to every fan in the house.

We have a range of cordless microphones available for hire.. Perfect for speeches, announcements or sing to the best Karaoke tracks..

Industry standard SM58 cordless microphone for hire in Melbourne. Combines simple wireless setup, professional-grade performance, and a SM58 industry-standard vocal microphones to deliver warm and clear vocal reproduction.

SAMSON UB7 HEADSET/LAPEL WIRELESS MICROPHONE

Need to hire a vocal microphone in Melbourne... then this is it ! If you’ve ever heard someone sing or speak into a live microphone, there’s an excellent chance it was an SM58. Rock stars. Pop idols. Comedians. Presidents. Popes.

Need an inexpensive microphone for hire in Melbourne ? DM3.0 is a dynamic moving coil microphone designed to handle a wide variety of vocal and instrument applications for both live sound and recording. The wide super cardioid polar pattern minimizes feedback problems and effectively rejects signals not originating directly in front of the mic capsule, resulting in a warm and natural response for nearly every type of voice. Supercardioid pick up pattern to reduce feedback Gold plated XLR connector Excellent off axis rejection for superior gain before feedback Dent resistant spring steel grille combined with rugged zinc alloy body Ultra sensitive Neodymium element for high output, low distortion and clean sound Special shock-mounting allows movement of the mic element and greatly reduces handling noise

1. Make sure that the supplied receiver and AH1 transmitter are factory preset to the same channel. 2. Physically place the receiver where it will be used and extend its antenna(s) vertically. 3. Set the power switch on your UH1 transmitter to the “off” position (away from the arrow) and place a fresh battery in it. Then turn the transmitter back on momentarily; its LED will flash once and then go off if the battery is sufficiently strong. Once battery strength is verified, turn the transmitter off again. 4. If you are using an AH1 headset microphone, position it correctly as per the illustrations on page 12. If you are using an AirLine UHF Wind Instrument System, clamp the horn mic to your instrument as described in the supplied HM40 owners manual. 5. Turn your audio system off and make the physical cable connection between the receiver’s balanced or unbalanced output jack (if necessary, both can be used simultaneously) and a mic level audio input of your amplifier or mixer. If your system contains a CR77 or UM1 receiver, be sure to set its Audio Output Level switch correctly. 6. Turn the Volume, Level or AF Level knob on the receiver completely counterclockwise. Connect the supplied AC adapter to the receiver and plug it in (or place a fresh battery in the UM1 receiver), but leave its power off for the moment. 7. Turn on the receiver. If your system contains a CR77 receiver, its “Power” LED will light steadily red. (Note: the UM1 receiver has no such LED.) 8. Turn on your AH1 transmitter. If your system contains an AR1 receiver, its “Power/ RF” LED should change color from red to green, indicating that it is receiving valid RF signal and is placed and positioned correctly. If your system contains either a CR77 or UM1 receiver, one of the “A/B Receiver” LEDs will be lit, showing you whether the (left)“A” or (right)“B” receiver is currently being used. The CR77 / UM1 meter will also indicate the strength of the incoming RF signal. 9. Turn on your connected amplifier and/or mixer but keep its volume all the way down. Make sure the AH1 transmitter is unmuted. Set the Volume, Level or AF Level knob on the receiver fully clockwise; this is unity gain. 10. Speak or sing into your headset microphone (or play the instrument connected to the horn microphone) at a normal performance level while slowly raising the audio input control of your amplifier or mixer until the desired level is reached. 11. Do a walkaround through the intended area of coverage while observing the receiver’s “Power/RF” LED or RF Meter; it should indicate sufficient RF reception in all areas of coverage. Reposition it (or its antenna) as necessary. If extended range coverage is required, a Samson CR77 or UM1 true diversity receiver (set to the same channel as the transmitter) should be used 12. If you hear any spurious noise from the receiver output when the transmitter is turned off, use the supplied plastic screwdriver to adjust the receiver Squelch level control, slowly turning it clockwise to the point at which the noise disappears. Note: images & descriptions for illustration purposes only (the final delivered product may vary from that shown or described)

Need to hire a data video projector for your next event, then this is an inexpensive option. Bright and easy to use. It accepts both VGA (D Sub) or composite RCA input.. TECHNOLOGY Projection System Epson 3LCD, 3-chip technology LCD Panel 0.55-inch with MLA (D7) OPTICAL Zoom 1 - 1.35 (Optical Zoom) Screen Size 30" to 350" [0.88 to 10.44 m] (Zoom:Wide) 23" to 260" [0.88 to 10.44 m] (Zoom:Tele) Projection Distance 60" screen 1.8 - 2.17m Throw Ratio 1.45 (Zoom: Wide), 1.96 (Zoom: Tele) Projection Lens F Number 1.44 Projection Lens Focal Length 16.7 mm Focus Method Manual Focus Offset 8:1 IMAGE Colour Light Output 2,600 Lumens White Light Output 2,600 Lumens Resolution SVGA Native Aspect Ratio 4:3 Contrast Ratio 3,000:1 Lamp Hours Normal/Eco: 4,000/5,000 Hours Lamp Type 200W UHE (E-TORL) Keystone Correction Vertical: -30 to +30 degrees CONNECTIVITY Input: Video 1 x RCA (Yellow), 1 x S-Video, 1 x Component (via D-sub 15-pin) Input: Computer 1 x D-sub 15-Pin (RGB), 1 x USB 2.0 type B Input: USB Memory Device - Input: Three-In-One USB Display 1 x USB 2.0 type B Input: Digital - Input: Audio 1 x RCA (Red/White) Input: Control 1 x USB 2.0 type B Input: Epson USB Document Camera - Wireless Connectivity - Output: Video - Output: Audio - Speaker Output 1W ADVANCED FEATURES EasyMP Network & Control No EasyMP Network Projection No PC Free Presentations No USB Plug 'n Play Yes AV Mute Slide No Instant Off Yes Direct Power On/Off Yes Security Kensington®-style lock provision Padlock Security cable hole Password protect function Colour Modes Dynamic, Presentation, Theatre, Photo, sRGB, Blackboard, Whiteboard GENERAL Dimensions D x W x H 228 x 295 x 77 mm Weight 2.3 kg Lamp Warranty 12 months or 750 hours* Projector Warranty 2 Years Power Consumption: Lamp on Normal: 270W / Eco: 223W Power Consumption: Standby 0.47W (communication off) Noise Level Normal: 37dB / Eco: 29dB

8' x 6' Tripod Projector Screen. We have other size projector screens available for hire. Please contact us with your requirements.

We have overhead projectors available for hire ... print or draw your own slide.. An overhead projector (OHP), like a film or slide projector, uses light to project an enlarged image on a screen. In the overhead projector, the source of the image is a page-sized sheet of transparent plastic film (also known as 'foils') with the image to be projected either printed or hand-written/drawn.

Benq GS1 Battery Operated Video Projector for hire.. This projector comes with inbuilt wifi, fully self contained battery powered. HDMI input.. Suitable for out door use .. waterproof.. Cable-free outdoor family entertainment with built-in USB reader Palm sized, 1kg light weight and 3 hour battery life WiFi and Bluetooth 4.0 connectivity Main Specifications: Brightness: 300lm Contrast Ratio (FOFO): 100000:1 Speaker: 2W x 2 All Specifications: Display: Projection System DLP Resolution: 720p (1280x 720) Brightness: 300lm Contrast Ratio (FOFO):100000:1 Display Color:1.07 billion colors Native Aspect Ratio:16:9 Light Source:LED Optical: Throw Ratio:0.8 (80"@1.4m) Zoom Ratio:Fixed Lens:F=1.5, f=5.53mm Keystone Adjustment:1D, Vertical +/- 40 degrees Projection Offset:102.5%±2.5% ‎ Image Size (Clear Focus / Maximum):30''~ 200"‎

12' x 8' Pull Down Projector Screen. We have other size projector screens available for hire. Please contact us with your requirements.

Great to projector photos, drawings or sketches onto surface.. Allows accurate tracing... and yes you can hire these from our Melbourne showroom. A versatile art projector for the novice to experienced artist. The tracer enlarges any design or pattern onto a wall or easel from 2 to 14 times the original size. Projected image can be easily traced and colored as desired.

The DL 900 is an 900W smoke machine. and can produce smoke quickly due to the low reheat time and includes a wireless remote control. Ideal hire for small rooms and venues. Features High Performance heating element 900 Watt Stylish metal housing Powerful motor Carry handle Corded push-button remote with light Wireless remote control

Ideal for hire for medium venues.. The M Stage Fog Machine provides quality, performance and innovation. It comes with a generous tank capacity that heats quickly to ensure a a fog-filled room within minutes. Features High Performance heating element Stylish metal housing Powerful motor Carry handle Corded push-button remote with light Wireless remote control

Nimbus™ is a professional dry ice machine which produces thick, white fog that hugs the floor and dissipates without rising. This powerful machine heats enough water to create fog from 10lbs of dry ice to provide 6 minutes of run time. Output and flow are easily controlled, thanks to an adjustable multi-level control arm. Dual heaters allow for faster heat-up and recycle times. A low water sensor increases safety. Professional dry ice machine creates thick, low-lying clouds that hug the floor Quickly heats water to its optimal operating temperature using simple, plug-n-play operation Heat the water in a fraction of the time by utilizing the second heating element Manipulate the output and flow with the adjustable, multi-level control handle Increase safety with low-water and temperature sensors that automatically shut off heaters Heating Element: (single) 1,400W (dual) 3,000W Initial Heat Time: (single element): 50 min (Dual element): 30 min Re-heat Time: (single element): 30 min (Dual element): 15 min Tank Capacity: 17 L Max Water Temp.: 79°C Dry Ice Capacity: 4.5 kg (pallets) Run Time: approx 6 min Input Voltage: 230 VAC, 50 Hz Power and Current: (single element): 1,400 W, 6.2 A @ 230 V, 50 Hz (dual element): 3,000 W, 12.3 A @ 230 V, 50 Hz Size:513 x 465 x 470 mm Weight: (empty): 13 kg (full): 34 kg

Compact and portable professional dry ice machine creates a thick, white cloud that hugs the floor Easy, plug-n-play operation quickly heats water to its optimal operating temperature Ready to cloud in less than 20 min with a 4 liter water tank capacity Simplify transport to any mobile event with a smaller-sized machine Manipulate the output and flow with the adjustable, multi-level control handle Increase safety with low-water and temperature sensors that automatically shut off heaters

The Smallest Battery Operated Smoke Machine we have for hire. - The smallest smoke machine available - Fits in your hand - Portable battery operated smoke machine - 12V input - includes fluid and recharger

Need to hire a bubble machine in Melbourne .. then this is it . Great compact bubble machine that is designed to create and project bubbles for your next party or event. The machine features a robust housing, with a removable fluid tray for easy access and cleaning. Easy to use, just simply add your water based bubble fluid and plug it in, in seconds it will start creating bubbles that everyone will enjoy.

An amazing stage effect ..erupts vertical plumes of smoke. Available for hire from our Melbourne showroom..

Great dry-ice machine for creating low lying fog. Perfect hire for weddings, theater or event. With straightforward operation and variable output, the Pea Souper is convenient and capable giving approx. 5 minutes of fog production with one fill of dry-ice. FEATURES INCLUDE 9kg / 20lbs of dry ice provides approx. 5 mins of effect 18kg/40 lbs of dry ice before reheating required Lightweight and portable Built-in thermal safety cut-off Adjustable flow rate - 4 levels

Cloud fazer 1500W - creates continuos almost invisible haze - designed to especially enhance lighting and laser beams

Need to hire a more powerful smoke machine for larger venues? This 3000W Fogger provides the quality, performance and innovation for which Dune is known. It comes with a large-capacity tank and quickly heats up water-based fog to fill a venue within minutes. Features 3000w power DMX controllable Visible level window Wired timer remote with timer/flow/interval control Projection up to 10 m Tank capacity 6 liters Output volume 1150 m3 / min 6min preheating + 10sec reheating Non-stop function: continuous flow for 5 minutes Visualization of the state of preheating on LCD Heating time 6 min 6 litre tank Dimensions 625 x 380 x 270 mm Weight 15 kg

Need bubbles but want smoke.. this is the machine you need to hire 3-in-1 effect unit that combines a smoke machine, bubble machine, and LED wash light. Designed to give your next party or event the colour and effect it needs. It creates a volley of bubbles filled with smoke that are blown out and upwards, while the built-in LED lights colour the smoke bubble for a ‘glowing orb’ type effect. This effect machine uses a dual wand bubble blow with high-powered fan, and uses 18x 3W RGB LEDs as the colour wash.

Perfect bubble machine to hire when you want bubbles but have no power.. The perfect take anywhere bubble machine. Battery operated ..

Need to hire a bubble machine in Melbourne... ...featuring 3 double wands, a manual bubble button, and extremely high output. When you need bubbles for a large area, or complete bubble coverage of an area, this is as good as it gets. Power: 230V AC / 50Hz Weight: 5.9kgs Size: 483mm x 381mm x 305mm

Extra Large Bubble Machine for hire in Melbourne... This powerful bubble machine has double wheels and dual blower fans, meaning large quantities of bubbly fun for a number of different parties and events. Unleash thousands of bubbles upon kids parties, weddings and marquee events for a fun-filled effect for everybody to enjoy! Power supply: 220-240Vac / 50Hz Consumption: 100W Dimensions: 460 x 390 x 450mm Weight: 8.3kg

This foam machine produces clear and bubbly foam suitable for a wide variety of applications. Output is continuously regulated, the foam produced is safe, clean and odourless. This foam machine with a smaller size that is suitable for small stage effects and parties.

Great hire for a small room, testing, stage.. Features High Performance heating element Stylish metal housing Powerful motor Carry handle Corded push-button remote with light Power: 400W Voltage: AC220-250V 50/60Hz Heat up Time: 8 minutes Weight: 2.5KG Size: 23*11*11(cm) Tank capacity: 0.3L Output: 2000cu.ff/min

Chauvet BOB LED LED Simulated Flame Effect BOBLED is the market's leading simulated flame effect light, but generates no heat. This LED powered, duty-cycle free fixture perfectly simulates a flickering cauldron. BOB LED can either stand on included legs or hang from an included chain. Features: • LED fixture emits a simulated flame effect with no heat • Achieve continuous operation with no duty cycle • Includes 3 legs for table support and a chain for suspension Light Source: 66 LEDs (54 orange, 12 blue) 0.25 W (20 mA) • Stand Height: 8 in (203 mm) • Viewing Angle: 360° • Input Voltage: 240 VAC, 50 Hz • Power and Current: 27 W, 0.2 A @ 230 V, 50 Hz • Weight (with legs): 2.3 kg • Size (with legs): 445 x 445 x 775 mm