In Stock
Hire HIGH POWERED 15″ PASSIVE SPEAKER, hire Speakers, near Kingsgrove
Show All


Account profile image


Kingsgrove, NSW, Australia

Delivery unavailable

Customer collect only


Using a **HIGH POWERED 15″ PASSIVE SPEAKER** with a separate power amplifier is a traditional approach for setting up a PA system. Here's how you can go about it, following the steps you've outlined: 1. **Evaluate Venue Size and Guest Count:** - Measure the dimensions of the venue to calculate its volume. - Consider the layout (indoor/outdoor) and whether there are any acoustic challenges. - Estimate the number of guests attending. This helps determine the coverage area and required volume level. 2. **Calculate Required Sound Pressure Level (SPL):** - Determine the SPL needed based on the event type and desired audio impact. - Calculate the required SPL at different points in the venue to gauge total sound output. 3. **Match Wattage and Impedance:** - Choose a power amplifier with a wattage rating that matches or slightly exceeds the power handling capacity of the passive speakers. - Match the impedance (ohms) of the amplifier and speakers for optimal performance and power distribution. 4. **Speaker Placement and Coverage:** - Strategically position the passive speakers throughout the venue for even coverage. - Consider the dispersion angle of the speakers to ensure consistent sound quality across the audience. 5. **Room Acoustics and Equalization:** - Account for the venue's acoustics, as they impact sound reflection and reverberation. - Use an equalizer to fine-tune the system's frequency response based on the venue's characteristics. 6. **Sound Checks and Adjustments:** - Conduct thorough sound checks before the event to ensure balanced audio and coverage. - Make adjustments to the settings as needed based on the actual conditions of the venue. 7. **Speaker and Amplifier Compatibility:** - Ensure that the passive speakers' power handling capacity aligns with the amplifier's output power to prevent distortion or damage. 8. **Power Distribution and Safety:** - Distribute power loads evenly to avoid overloading circuits and equipment. - Adhere to safety practices, including securing cables and anchoring speakers to prevent accidents. 9. **Consider External Factors:** - If there are noise restrictions, be mindful of not exceeding permissible sound levels. 10. **Event Flexibility:** - Make sure the selected system is flexible enough to accommodate various event types and sizes. 11. **Expert Consultation:** - If you're new to PA system setups, consider seeking advice from experienced audio engineers or professionals to ensure the best results. 12. **Maintenance and Storage:** - After the event, properly store and maintain your equipment to extend its lifespan and ensure consistent performance. Remember that the success of your PA system setup also depends on the quality of the equipment you choose. Always opt for reputable brands and reliable equipment that suit your needs and budget.


Logo for Lightsounds


Kingsgrove, NSW, Australia

until 17:00
Kingsgrove, NSW, 2208